Digital forensics
Preferred for evidence collection and lab transfers. The magnetic closure opens with gloved hands without Velcro snagging conductive forensic gloves.
The Mission Darkness NeoLok Non-Window Faraday Bag for Phones blocks cellular, Wi-Fi, Bluetooth, GPS, and other wireless signals when fully sealed. It fits multiple phones or small devices, depending on their size, and keeps the contents out of view.
Built for digital evidence collection, transport, and forensic examination, its magnetic NeoLok closure opens easily with gloved hands inside a forensic enclosure without Velcro snagging conductive gloves. The unique serial number supports chain-of-custody documentation. You can also use the bag to disconnect personal devices during travel or storage.


Moving a device into an analysis enclosure should not mean fighting the bag. NeoLok replaces the main Velcro closure with a double roll held by strong magnets.
Opening a Velcro-closure bag inside a forensic box can snag, rip, or tear the conductive gloves used to handle evidence. NeoLok replaces that abrasive main closure with a magnetic seal that opens easily with a gloved hand. This helps protect the enclosure gloves and makes NeoLok the preferred model for forensic-box handling.
Designed for the transfer from collection site to lab. Keep the quick-snap strap fastened during transport.
The spacious interior can fit multiple phones or small devices, depending on their size and cases. Pack phones alongside smaller items such as keyfobs, smart watches, or access cards. Keep everything within the 6.5 × 9-inch usable interior and leave enough room to fully double-roll and seal the opening.
16.5 × 22.9 cm
These are the usable dimensions when closed, not the outside measurements. Check bulky cases and accessories for fit; the closure needs to roll freely without anything crossing the seal.
The magnets hold the double roll in place. The snap strap adds closure protection while the bag is in transit.
01 / DOUBLE ROLLPlace the device fully inside the bag, then double-roll the top opening.
02 / MAGNETIC SEALThe magnetic seal holds the rolled closure in position without a main Velcro seal.
03 / TRANSPORT STRAPFasten the quick-snap strap for transport. It can be undone when introducing the bag into an analysis enclosure.
A non-window design keeps the device out of view. A unique serial number supports asset tracking and evidence chain of custody, while the transparent rear pocket displays agency information.
The usable interior measures 6.5 × 9 inches when closed. Check the device and its case against that space before use.
Double-roll the opening to engage the magnetic seal. The main closure opens easily with a gloved hand.
Fasten the quick-snap strap after double-rolling the opening to keep the bag securely closed during transport.
Display an agency card or identification in the clear rear pocket. This pocket does not provide a view of the device inside.
Two layers of shielding fabric on every interior side, with dual paired seam construction.
Ballistic nylon protects the device and shielding fabric during handling.
The Velcro-sealable rear pocket holds a card or sticker. Permanent woven labels are available during production.
Purpose-built for forensic handling, with practical uses wherever phones and small electronics need wireless isolation.
Preferred for evidence collection and lab transfers. The magnetic closure opens with gloved hands without Velcro snagging conductive forensic gloves.
Keep personal and business phones disconnected during executive travel, sensitive meetings, border crossings, and storage.
Block wireless communication with enclosed devices. Use the bag when you need a physical break from cellular, Wi-Fi, and Bluetooth networks.
Block wireless access paths used for remote hacking and network-based tracking while sealed. GPS reception is also blocked; previously stored data remains on the device.
Include shielded storage for phones and small electronics in your EMP preparedness plan. TitanRF fabric is lab-tested to MIL-STD-188-125; see the fabric testing details below.
Reduce radio-frequency electromagnetic energy passing to and from enclosed devices. Keep the bag fully sealed whenever RF isolation is needed.
Watch the NeoLok phone bag demonstration.
Keep the device isolated from collection through the lab handoff. NeoLok opens easily inside a forensic enclosure, helping protect its conductive gloves.

Place the device inside, double-roll the opening, and fasten the quick-snap strap. Record the bag's unique serial number in your chain-of-custody documentation.

Keep the bag fully sealed and the transport strap fastened on the way to the lab. The external branding pocket keeps identification visible without opening the bag.

Place the sealed bag inside the forensic enclosure and close the enclosure before opening the bag. Use the built-in conductive gloves to open NeoLok and handle the device.
Velcro closures can snag or tear conductive gloves inside forensic boxes. NeoLok’s magnetic main closure opens easily with a gloved hand, making it preferred for this workflow.
Ideal for gloved handling inside forensic enclosures, including the BlockBox Lab XL and BlockBox Touch.
A properly sealed bag blocks wireless communication, including remote-wipe commands sent over those connections. It does not power off the device or stop offline processes. Follow your organization’s evidence-handling procedures.
Choose the size, window, and closure that fit your workflow.
A phone-size bag with a double-roll Velcro closure. Non-window design keeps contents out of view.
View price
Explore this bag →Magnetic closure with a shielded window to view the screen and battery status. Viewing only; no touchscreen operation.
View price
Explore this bag →More room for tablets or multiple phones, with the same magnetic closure and quick-snap strap.
View price
Explore this bag →Keep a device charged and shielded during transport. Includes a power bank, cables, and a viewing window.
View price
Explore this bag →A narrower sleeve for a phone with a typical case and small accessories. Available with either a magnetic NeoLok or Velcro roll-top closure.
View price
Explore this bag →A larger bag for laptops and bulkier equipment, with a double-roll Velcro closure. Compare the device and its case against the closed interior dimensions.
View price
Explore this bag →Blocks wireless signals from low MHz to 40GHz when properly closed. Proper enclosure blocks wireless communication to and from the device, including remote wipe commands delivered over those connections.
TitanRF Faraday Fabric is lab tested and certified to shielding effectiveness standards MIL-STD 188-125 and IEEE 299-2006.
Velcro closures can snag and tear conductive gloves when opened inside forensic boxes. NeoLok uses a magnetic main closure that opens easily with a gloved hand, helping protect the gloves during the collection-to-lab handoff. View the standard Velcro phone bag if that closure better suits your use.
No. The clear pocket on the back is an external branding pocket for a card or sticker, not a shielded window for viewing the device screen.
Double-roll the main opening so the magnetic seal makes complete contact, then fasten the quick-snap strap for transport. The magnetic closure opens easily with gloved hands. The separate rear ID-card pocket uses Velcro to secure a card or label.
Use the rear pocket for a business card or sticker, or ask about woven labels added during production. Request a quote for custom labeling.
Place the device fully inside, double-roll the opening, and let the magnetic seal hold it in place. Fasten the quick-snap strap during transport. Keep cables, straps, and device corners out of the closure, and check the bag for damage as part of your handling routine.
The ballistic nylon exterior is water-resistant. Keep the interior dry and protect the shielding fabric from punctures and unprotected sharp objects.
Choose NeoLok for a magnetic closure built around forensic handling.